Crestala Closeboard panel made by Crestala Fencing Centre.
Picture of the strong frame used for Crestala Closeboard and TGV Panels.
Crestala Closeboard panel made by Crestala Fencing Centre.
Picture of the strong frame used for Crestala Closeboard and TGV Panels.

Crestala Fencing Centre

Crestala Pressure-Treated Closeboard Fence Panel

The Crestala fully framed closeboard panel is an excellent quality and strong fencing panel made just for you by hand in our workshops. 

The frame is screwed together, unlike many other closeboard panels where the frame is just tacked together with nails.

All the wood used to make up these quality panels is pressure-treated before assembly.
There will be some colour variation.

All Crestala Closeboard Panels are made to order.

All Crestala Closeboard Panels are custom-made and bespoke; therefore, we cannot offer refunds or exchanges.

Width: 1.83m (6')
Height: 1.8m (71")
£75.22
Tax included.

Pickup available at Crestala Fencing Centre

Key Features
  • Made to order
  • Pressure-treated timber
  • 100mm Feateredge slats
  • Suitable for use with wooden posts or concrete slotted or metal Duraposts
  • Panels are 1.83m(6′) wide but can be made smaller or are easily cut down
Anticipated Lead Time
Made to Order - Lead times may vary, but they are usually only a few days. However, during busy periods, this may extend up to three weeks. If time is essential, please contact our Sales Team before ordering.
Product Specifications
Materials:All of the wood used in this panel is pressure treated to provide maximum panel life. The panel is boarded vertically using our standard 2ex 100 x 22 feather edge, giving the look of a traditional Closeboard fence but with the ease of a panel. At 1.83m(6') wide, they can easily replace a standard overlap fence panel utilising existing wooden or concrete slotted posts.
How to Use

Crestala Closeboard Panels will fit into any standard concrete slotted post and can be secured with panel security brackets.

For wooden posts, the closeboard panels are attached with four 75 to 100 mm external woodscrews through each of the vertical frame sides into the posts.

For DuraPost, you screw through the predrilled holes in the "H" section post using 38mm external wood screws. Four screws on each side.

On concrete slotted posts, the panels will drop into the slot.
Measuring & Quantity Calculations

Crestala closeboard panels standard width is 1.83m(6') wide. We can manufacture shorter widths or non-standard heights to order.
Installation Tips

Use size 8 to 10 (4 to 5mm) self-drilling wood screws, as this reduces the risk of splitting the timber or, alternatively, pre-drilling the holes with a small diameter drill.
Recommended Aftercare

Please see our recommendations in our Helpsheet on Looking after Pressure Treated Fencing.
Product Helpsheets
Related Products