Composite Decking.


We Stock SmartBoard Composite Decking as we believe that it is one of the best composite decking boards available as it offers a long lifespan coupled with very good value for money.


SmartBoard logo

SmartBoard composite decking comes in two colours – Chocolate brown & Battleship grey – with a matt brushed finish.
The boards are reversible - ribbed on one side & Flat on the other.   

  • The manufacturers offer a warranty of 25 years for residential use & 10 years for commercial use.                                 
  • The boards are 3.6m long, 138mm wide & 20mm deep, with each 3.6m board weighing 13.32Kg or 3.7Kg per metre.
  • SmartBoard composite decking is made of a mix of the residue from the manufacture of Oak flooring (60%), recycled dense polyethylene from shampoo bottles etc ( 30% ) and additives to help reduce expansion & contraction (10%).


 Chocolate brown SmartBoard                          Battleship grey SmartBoard                           Battleship grey & Chocolate brown SmartBoard mix                   Click on the photos to enlarge                                                                                                                          

  • To order or for more detailed information on SmartBoard, contact us online or phone sales on 01892 864646.

Points to note:

  • As SmartBoard contains a high percentage of natural wood fibres there may be variations in colour & finished appearance.  Once fitted & exposed to water & the sun SmartBoards will undergo a natural weathering process to a slightly lighter colour shade.
    After long-term weathering, CompoCare by Owatrol can be used to seal & revitalise SmartBoard.
  • SmartBoard  will expand / contract approximately  + / - 1mm per metre length or 3.6mm per 3.6m board.  A gap of 5mm must be left between parallel boards  & ends.  This gap should be increased to 10mm when adjacent to walls or buildings.
  • The SmartBoards should only be fixed with 63mm SmartBoard coloured decking screws as they have been made specially for SmartBoard, do not require a pilot hole & are designed to create a recess for the screw head.
    Use 2 screws per joist, with a minimum of 20mm from a side or end.   The first groove on the ribbed side is ideal. 

    Choclate brown Smartboard showing matching SmartBoard decking screws & expansion gaps.                        Battleship grey Smartboard with matching SmartBoard decking screws & showing expansion gaps.
  • A good quality cordless impact driver is recommended for inserting the screws as they offer the best control to place the head of the screw in the correct position just under the surface.   
    Standard combi – drills can be used with care, but It is strongly recommended that inserting the screws
    is finished by hand to achieve the optimum head position.
  • For domestic applications, the joist spacing should be a maximum of 400mm.
  • SmartBoard decking should be kept clean by regular sweeping & can be washed with warm soapy water, rinsing with clean water.
    Pressure washers can be used with care.  Do not let the outlet nozzle get too close to the decking boards.  We recommend that a small inconspicuous test area is cleaned & allowed to dry before commencing to clean the whole deck.
    CompoClean by Owatrol can be used to remove stains.

Installing Composite Decking may require planning permission. Please check this link to the Government Planning Portal which gives some basic guidance.  If you are in any doubt please check with your local planning office, who are usually very helpful.  Building Regulations usually apply to decking structures requiring planning permission.

SmartBoard Composite Decking.

  • Battleship grey or Chocolate brown.
  • Reversible boards -  Ribbed or smooth.
  • To order or for more information on SmartBoard, contact us online or phone sales on 01892 864646.
  • Trade & quantity discounts available.

Specifications & price

3.6m long X 138mm wide X 20mm deep.  £34.12

SmartBoard coloured composite decking screws.

  •      Coloured tops to match decking.

Specifications & price

Pack 200 screws£24.19





Enter the value you want to convert including units (e.g. 1.5m) or highlight the text on the page.



This is a text-based metric/imperial converter which means it has some limitations in the format in which it expects the data.

Things like 1' 6", 12ins or 2.3m are fine but don't mix imperial and metric formatting, for example 1.5ins (for an inch and a half) won't work, you can use 1 1/2 ins however.

The units that are recognised are as follows:

  • Imperial units
    • yd, yds, yard, yards
    • ', ft, foot, feet
    • ", in, ins, inch, inches
  • Metric units
    • m, metres
    • cm, cms, centimetres
    • mm, mms, millimetres