Black Angle Posts for Chainlink

Black Painted Angle Iron Posts

Black Angle Iron posts are a comparatively easy way to support Chain Link.

Also available Painted Green or in a Galvanised finish.  contact us for pricing information.

  • Inters are holed for the line wires & are pointed for banging in.
    Splayed bottoms for concreting in are available. contact us for pricing information.
  • Ends and Corners come complete with bracing Struts, lacer bars for the chain link & fittings for tensioning the line wires. Posts & struts have splayed bottoms. They are normally concreted in.
  • Two-ways have bracing struts and fittings the same as Ends or Corners but are normally fitted every 50 to 75 metres to provide stability and tensioning in long straight runs.
  • Angle Iron Gates are available and can be covered with Chain Link to match the fencing. Angle hanging & shutting gate posts are used to fit the gate into the run in the desired position.  contact us to discuss the size required & for pricing information.
  • Angle Posts etc are also available for higher chainlink fences eg. tennis courts.  contact us to discuss fence height required & for pricing information.

Specifications & price

Chain link height: 0.90m (3'0")
Post length:1.5m (5'0")
  • Inter Post £11.39
  • End Post £42.44
  • Corner Post £68.60
  • Two-way Post £68.60
Chain link height: 1.20m (4'0")
Post length: 1.8m (6'0")
  • Inter Post £13.04
  • End Post £52.94
  • Corner Post £83.18
  • Two-way Post £83.18
Chain link height: 1.50m (5'0")
Post length: 2.1m (7'0")
  • Inter Post £15.17
  • End Post £58.06
  • Corner Post £90.71
  • Two-way Post £90.71
Chain link height: 1.80m (6'0")
Post length: 2.4m (8'0")
  • Inter Post £16.36
  • End Post £61.70
  • Corner Post £96.62
  • Two-way Post £96.62

To order, check stock or arrange delivery, please contact us.


Enter the value you want to convert including units (e.g. 1.5m) or highlight the text on the page.



This is a text-based metric/imperial converter which means it has some limitations in the format in which it expects the data.

Things like 1' 6", 12ins or 2.3m are fine but don't mix imperial and metric formatting, for example 1.5ins (for an inch and a half) won't work, you can use 1 1/2 ins however.

The units that are recognised are as follows:

  • Imperial units
    • yd, yds, yard, yards
    • ', ft, foot, feet
    • ", in, ins, inch, inches
  • Metric units
    • m, metres
    • cm, cms, centimetres
    • mm, mms, millimetres