Adjustable hanging set with hooks on plates for field gates.
This type of hanging set is suitable for 75mm (3″) wooden field gates, being hung on wooden posts or brick/concrete piers.
There are three sizes to suit gates widths from 900mm (3′) to 4.3m (14′) gates.
This set can be used for hanging gates either between or behind the posts.
A 19mm auger will be needed to drill a hole through the gate hanging stile for the bottom adjustable ride.
A 10mm drill bit for wood at least 100 long is required to drill the holes for the top strap fixing bolts through the gate top bar.
A 12mm drill bit. Either for wood or masonry depending on what type of posts/pillars are being used.
A selection of spanners/adjustable wrenches.
As the nut, bolt and coach screw sizes can vary, please check spanner and drill sizes required when you receive your set.
To make it harder for your gates to be stolen it is normal practice to reverse one of the pins that the top and bottom rides fit onto. This means that the gate(s) cannot just be lifted off of the hinge pins and removed. It does not matter which, personally we prefer reversing the top pin so that the pins are facing each other. We think this looks neater.
- It is important that all holes are correctly positioned and drilled. Check carefully before drilling.
- Gates cannot normally be returned once drilled or marked in any way.
You may find this additional information from our blog useful…