Blackham Domed Top Tongue and Groove Gates

Blackham Domed Top Tongue and Groove Gates

£137.68£276.29 inc. VAT

Available on backorder

  • Domed top tongue and groove gate.
  • Made to order in our workshops
  • Fully framed, ledged and braced.
  • Priced per gate.
  • Standard frame Ex* 100 x 50 Stiles & Ex 100x 38mm rails.
  • Special widths and heights are priced as the next size up.
  • Widths over 1.2m can be made but are not guaranteed.
    For gate widths over 1.2m wide, we recommend using a heavy frame.  Please contact our Sales Team for more information and price.
  • For help with measuring up, see our Blog entry Measuring for new side or entrance gates.
  • Suitable gate fittings are available for these gates.

More Information

Crestala’s Blackham domed top tongue and groove gates are manufactured to order on-site in our workshop by skilled Gatemakers. Lead times for gates being made in our workshops are generally one to two weeks; however, during busier periods, it can extend up to 4 weeks. Please ask our Sales Team about the lead time when you order.

We can make non-standard special sizes.

Blackham domed top gates manufactured by Crestala are robust yet offer excellent value for money. The timber used is pressure-treated, joinery-grade, slow-growing  Scandinavian redwood. The treatment provides good protection against rot and also insect attacks.

For Blackham gate widths over 1.2m wide, we recommend using a heavy frame gate like the Withyham range. Please contact our Sales Team for more information.

We can supply all the fittings you need to hang and secure your new Blackham gate. We recommend fitting adjustable hinges to alleviate any seasonal gate movement.

If you are unsure about measuring for a gate, please read our blog, Measuring for new side or entrance gates which provides guidance on the measuring process, or speak to a member of our Sales Team.

Blackham tongue and groove gates made by Crestala need to be stored, treated and cared for properly before and after hanging. Please, read the recommendations on our “Important Gate Care Information” sheet for more detailed instructions. Failure to follow these instructions may invalidate any future claims.

All treated softwood gates are susceptible to natural movement or shaking (cracks in the timber) as the timber expands & contracts during the normal weathering process. This is not considered to be a defect unless it is very severe.

*Measurements before the wood is planed. It’s roughly 5mm smaller than the original size.

Additional information

Width

0.9m (2'11"), 1.05m (3'5"), 1.2m (3'11")

Height

0.9m (35 1/2"), 1.05m (41 1/4"), 1.2m (47 1/4"), 1.5m (59"), 1.8m (71"), 2.1m (6'10")

Go to Top