Hampton Gates

£72.59£157.87 inc. VAT

  • Pressure treated Scandinavian kiln-dried softwood.
  • This lightweight gate has a slatted top with tongue & groove bottom section.
  • Standard gate sizes only listed below, if you require an unusual size please contact us.
  • Sold singularly but can be used in pairs.

More Information

Crestala Fencing are stockists and suppliers Charltons Gates, one of the UK’s leading gate manufacturers with an extensive range of Hardwood Iroko & untreated Softwood Drive Way Gates and Entrance Gates.

For more detailed information or to view the extensive full range of Charltons handcrafted gates visit www.charltonsgates.co.uk

It is important that all Charltons untreated Softwood & Iroko gates are stored, treated & cared for properly prior to hanging. Please read Charltons Gates’ Care and Treatment Guidelines for more detailed instructions. Failure to follow these instructions may invalidate any future claims.

When the gates are unwrapped, they should be treated straight away before they are exposed to the elements.

Softwood gates should be treated with a clear preservative such as Cuprinol Trade Wood Preserver Clear or Protek Clear Wood Preserver.  Preservative treatments must be fully dry before applying decorative microporous treatments such as Sikkens Cetol HLS & Filter 7 or Protek Royal Exterior Wood Finnish. Please follow the manufacturer’s application instructions fully. Care must be taken to treated all surfaces, particularly the bottom, all end grain & any holes etc for gate hardware.  The gates should be checked & retreated annually in accordance with the treatment manufacturers instructions.

Iroko gates should be treated with a solvent based treatment.  The gate may need degreasing with methylated spirits prior to any treatment. Use a microporous treatment such as Sikkens Cetol HLS Plus and Filter 7.  Please follow the manufacturer’s application instructions fully. Care must be taken to treated all surfaces, particularly the bottom, all end grain & any holes etc for gate hardware. The gates should be checked & retreated annually in accordance with the treatment manufacturers instructions.

It should be noted that all wooden gates are susceptible to natural movement or shaking (cracks in the timber) as the timber expands and contracts during the normal weathering process. This is not considered to be a defect unless very severe.  We do not recommend using dark stains or paints as they attract heat which may cause additional movement in the timber.

 

Thumbnail Width Height PriceQuantity
Hampton Gates - 91-5cm-3 - 1-09m-36 91.5cm (3')1.09m (42 15/16") £72.59 inc. VAT
-
+
Hampton Gates - 1-09m-36 - 1-09m-36 1.09m (3'6")1.09m (42 15/16") £83.40 inc. VAT
-
+
Hampton Gates - 1-22m-4 - 1-09m-36 1.22m (4')1.09m (42 15/16") £95.00 inc. VAT
-
+
Hampton Gates - 1-4m-46 - 1-09m-36 1.4m (4'6")1.09m (42 15/16") £112.14 inc. VAT
-
+
Hampton Gates - 1-52m-5 - 1-09m-36 1.52m (5')1.09m (42 15/16") £127.85 inc. VAT
-
+
Hampton Gates - 1-7m-56 - 1-09m-36 1.7m (5'6")1.09m (42 15/16") £143.50 inc. VAT
-
+
Hampton Gates - 1-83m-6 - 1-09m-36 1.83m (6')1.09m (42 15/16") £157.87 inc. VAT
-
+

More Information

Crestala Fencing are stockists and suppliers Charltons Gates, one of the UK’s leading gate manufacturers with an extensive range of Hardwood Iroko & untreated Softwood Drive Way Gates and Entrance Gates.

For more detailed information or to view the extensive full range of Charltons handcrafted gates visit www.charltonsgates.co.uk

It is important that all Charltons untreated Softwood & Iroko gates are stored, treated & cared for properly prior to hanging. Please read Charltons Gates’ Care and Treatment Guidelines for more detailed instructions. Failure to follow these instructions may invalidate any future claims.

When the gates are unwrapped, they should be treated straight away before they are exposed to the elements.

Softwood gates should be treated with a clear preservative such as Cuprinol Trade Wood Preserver Clear or Protek Clear Wood Preserver.  Preservative treatments must be fully dry before applying decorative microporous treatments such as Sikkens Cetol HLS & Filter 7 or Protek Royal Exterior Wood Finnish. Please follow the manufacturer’s application instructions fully. Care must be taken to treated all surfaces, particularly the bottom, all end grain & any holes etc for gate hardware.  The gates should be checked & retreated annually in accordance with the treatment manufacturers instructions.

Iroko gates should be treated with a solvent based treatment.  The gate may need degreasing with methylated spirits prior to any treatment. Use a microporous treatment such as Sikkens Cetol HLS Plus and Filter 7.  Please follow the manufacturer’s application instructions fully. Care must be taken to treated all surfaces, particularly the bottom, all end grain & any holes etc for gate hardware. The gates should be checked & retreated annually in accordance with the treatment manufacturers instructions.

It should be noted that all wooden gates are susceptible to natural movement or shaking (cracks in the timber) as the timber expands and contracts during the normal weathering process. This is not considered to be a defect unless very severe.  We do not recommend using dark stains or paints as they attract heat which may cause additional movement in the timber.

 

Additional information

Width

1.09m (3'6"), 1.22m (4'), 1.4m (4'6"), 1.52m (5'), 1.7m (5'6"), 1.83m (6'), 91.5cm (3')

Height

1.09m (42 15/16")

Reviews

There are no reviews yet.

Be the first to review “Hampton Gates”

Your email address will not be published. Required fields are marked *