More Information

Crestala’s Leigh curved top tongue and groove gates are manufactured in our workshop by our skilled gate makers. We can make special sizes.

For Leigh gate widths over 1.2m wide, we recommend using a heavy frame gate like our Eridge gates. Please contact our Sales Team for more information.

We also have all the fittings you need to hang and secure your new Leigh gate. We recommend using adjustable hinges to help alleviate seasonal gate movement.

If you are unsure about measuring for a gate, please read our blog, Measuring for new side or entrance gates, which should help, or speak to a member of our Sales Team.

Leigh gates manufactured by Crestala are made to be robust yet offer outstanding value for money. The timber used is pressure-treated, joinery-grade, slow-growing Scandinavian redwood. The treatment provides good protection against rot and insect attacks.

All Leigh gates supplied by Crestala must be stored, treated and cared for properly before and after hanging. Please, read the recommendations on our “Important Gate Care Information” sheet for more detailed instructions. Failure to follow these instructions may invalidate any future claims.

Treated softwood gates are susceptible to natural movement or shaking (cracks in the timber) as the timber expands & contracts during the normal weathering process. This is not considered to be a defect unless it is very severe.

*Measurements before the wood is planed. It’s roughly 5mm smaller than the original size.