A Standard closeboard panel is a fully framed and good quality, strong fence panel.
Vertically boarded using 125mm x 2ex 22mm feather edge giving the look of a Closeboard fence, but with the easy installation of a panel.
These panels are 1.83m (6′0″) wide so they can replace any standard UK fence panel utilising the existing posts. They come in heights ranging from 1.8m down to 0.9m
Standard closeboard panels can be fairly easily cut down to make a shorter width panel if needed.
The materials used to make a Standard Closeboard Panel is pressure treated with a preservative before assembly to extend the panels life.
Each panel is fully framed making a good strong panel. The timber used is cut from logs of mixed species, so there may be some variation in colouring.
Fitting gravel boards under fence panels is a good idea as if the panels are not in direct contact with the ground it will help to increase the panels useful life even more. Concrete, wooden or composite gravel boards can be used to keep the panels off of the ground. This reduces the risk of the panel base suffering from premature decay.
A flat-top Rotherfield closeboard gate or curved top Speldhurst closeboard gate can be used with these panels to provide a matching entranceway.
Note- The feather edge used on the gates is 100mm wide.