Polyhemp Balustrade rope.
Polyhemp Balustrade rope.
York Wooden Decking with Hemp rope balustrade.
York Wooden Decking with Hemp rope balustrade.
A wooden newel with polyhemp rope attached to it using brass fittings.
A wooden newel with polyhemp rope attached to it using brass fittings.
Newels with Rope Balustrade Hook Brackets.
Newels with Rope Balustrade Hook Brackets.
Brass Rope Balustrade Bracket.
Brass Rope Balustrade Bracke
Brass rope balustrade bracket with hook.
Brass rope balustrade bracket with hook.
Brass rope balustrade brackets eye on plate
Brass rope balustrade brackets eye on plate
Brass rope balustrade bracket.
Brass rope balustrade bracket.
Polyhemp Balustrade rope.
York Wooden Decking with Hemp rope balustrade.
A wooden newel with polyhemp rope attached to it using brass fittings.
Newels with Rope Balustrade Hook Brackets.
Brass Rope Balustrade Bracket.
Brass rope balustrade bracket with hook.
Brass rope balustrade brackets eye on plate
Brass rope balustrade bracket.

Crestala Fencing Centre

Rope Balustrade and Fittings

Rope balustrade and brass fittings are a simple way to mark the edge of a low-level deck or walkway. The number of ropes used is usually one, two or three, but you can have as many as you wish.

Items: 8m roll of 24mm diameter Polyhemp Rope
£74.22
Tax included.

Pickup available at Crestala Fencing Centre

Key Features

Rope balustrade and brass fittings are a simple way to mark the edge of a low-level deck or walkway. The number of ropes used is usually one, two or three, but you can have as many as you wish.

This balustrade style is only suitable for lower-level decks. (Less than 300mm above ground level). The rope is attached to the newels with brass fittings or by drilling holes through the newels and putting a stop knot in the rope.

Our brass fittings are for our 24mm Polyhemp rope.

  • Simple balustrade for low-level decks
  • 24mm Polyhemp rope
  • Only suitable for low-level decks
  • Easy to fit with brass end fittings
Anticipated Lead Time
Stocked items
Product Specifications
Materials:Polyhemp rope and Brass fittings
Installation Tips

Before cutting the rope to size, tape both sides of the cut (about 25mm) tightly with duck tape. The tape stops the end from unravelling and makes pushing through holes or into the brass end fittings easier.
Recommended Aftercare

To keep the rope in good condition and reduce the risk of green algae on the rope, we recommend treating the rope twice a year with clear water-repellent liquid. Any algae or mould that does grow can be removed with mould and mildew cleaner.
Related Products