Three packs of 12.5 x 12.5cm UC 4 treated posts.
12.5 x 12.5cm UC 4 treated posts.
Five bar driveway gates.
Five bar driveway gates
A four-way weathered, treated softwood post
A four-way weathered, treated softwood gate post
Packs of 10cm x 10cm UC4 posts waiting to be mortised.
Packs of 10cm x 10cm UC4 posts
4-way Weathered, Pyramid top gate posts
4-way Weathered, Pyramid top gate posts
A round top 10cm x 10cm treated softwood post
A round top 10cm x 10cm treated softwood post
Three packs of 12.5 x 12.5cm UC 4 treated posts.
Five bar driveway gates.
A four-way weathered, treated softwood post
Packs of 10cm x 10cm UC4 posts waiting to be mortised.
4-way Weathered, Pyramid top gate posts
A round top 10cm x 10cm treated softwood post

Crestala Fencing Centre

Treated Timber Gate Posts

We stock a large selection of treated square softwood posts in various heights and sections, suitable for use as gate posts. In sizes ranging from 100mm x 100mm for domestic gates to 200 x 200mm for large heavy gates.
All our gate posts are pressure-treated to UC4 for in-ground contact.

All softwood Gate posts have square ends (flat) as standard unless stated otherwise. As standard, larger-section Gate Posts (150 mm, 175mm, and 200 mm) are four-way weathered (pyramid top) at one end.

We have gate post seconds in stock in all three larger sizes suitable for use with field gates. We are offering these with up to a 50% discount. They are sold as seen and non-returnable. Use the link in the Made to Measure Sizes section below to request a quote.

Any square-cut post can have corner (edge) chamfering and/or router lines if desired. Oak gate posts are available on back order. Please use the link in Made to Measure Sizes to request a quote for these options.

Size: Post 1.5m x 100 x 100mm.
£12.96
Tax included.

Pickup available at Crestala Fencing Centre

Key Features
  • Our large stocks of sawn softwood posts are treated with the latest-generation preservatives to UC4 standard, providing an anticipated lifespan of 15 years unless stated otherwise.
  • Suitable for use as Fence or Gate posts.
  • Up to 50% off of Gate post seconds, suitable for field gates. Contact our Sales Team
Sizing Guide
Square Treated Gate Posts from 100 x 100mm (4" x4") up to 200 x 200mm (8" x 8"), in heights ranging from 1.5m (5ft) to 3.6m (12ft).
We can shorten posts or add post tops to order. Please contact our Sales Team for a quote and availability.
Anticipated Lead Time
Plain posts are available from stock. Special lengths and tops can usually be cut within 24 hrs , but may take longer during busy periods.
Product Specifications
Materials:Pressure treated softwood. Unless stated otherwise, all posts are pressure treated with the latest generation preservatives to UC4 standard for in-ground contact. The treatment companies say that this standard should give an anticipated lifespan of 15 years. To extend the life of the fence and gate posts, you may want to consider adding a timber treatment or wood preserver that can add extra protection to the part of the post going into the ground.
Installation Tips

To support the gate's weight, the post hole has to be deep. Use a tape measure to get the hole to the desired depth before dropping in the post, as most larger gate posts are heavy, difficult to handle, and can be hard to get back out of the hole to adjust the depth.

We have both fast-setting post mix and the more traditional Ballast and cement to make up a dry mix. Either of these options is suitable for securely fixing fence or gate posts in position.
Health & Safety
Health & Safety:

Wear gloves when handling posts, especially when dropping the post into the hole.

Please read our help sheet- Guidelines for the safe use of softwood treated timber.

Recommended Aftercare

Please read our Helpsheet on Looking After Pressure-treated Fencing
Product Helpsheets
Related Products