100mm x 22mm Edging Board

Our Edging Board is pressure-treated for general use.
It is suitable for fencing, landscaping or shed building.
 A useful-sized board that can also be used as a low gravel board.

• Treated for use as edging on lawns and paths
• It can also be used vertically for hit-and-miss fencing
• 10cm X 22mm

As the name implies, the Edging board is great for the edges of paths, flower beds, and lawns. It is usually attached to wooden pegs with galvanised nails or external woodscrews.

Edging boards can also be fixed vertically as part of a fence framework to make a "hit-and-miss" fence.

Tip: Tighter curves can be made by either:

Painting the board with white distilled vinegar a few hours before bending OR Cutting vertical grooves in the board about every 14mm (1/2") around the portion of the board you wish to curve. The cuts should not be more than half the thickness of the board deep and on the inside of the curve.
Remember to retreat the saw cuts with an end coat before fixing them in position.