Crestala Tongue and Groove Board Fence Panel

Tongue-and-groove board (TGV) fence panels are of very good quality and robust. They are made by hand in our workshops to your order.

Each fence panel is boarded vertically onto the same strong frame used for our Crestala Close Board Panels. Using our standard treated tongue-and-groove boards produces a strong, smoother, flat-faced panel.

As these panels are 1.83m wide, they can easily replace a standard overlap fence panel utilising existing posts.  Crestala TGV panels will fit into all standard slotted posts.
They can be made to a metric width of 1.8m if specified when ordering.

All Crestala TGV Panels are made to order. 

All Crestala TGV Panels are custom-made and bespoke; therefore, we cannot offer refunds or exchanges.

• Made to order
• Pressure-treated timber
• Suitable for use with wooden posts, metal DuraPost or concrete slotted posts
• Panels are 1.83m(6′) wide. Shorter widths can be made to order

Crestala Tongue and Groove Panels will fit into any standard concrete slotted post and can be secured with panel security brackets.

For wooden posts, the T & G panels are attached with four 75 to 100 mm external woodscrews through each of the vertical frame sides into the posts.

For DuraPost, you screw through the predrilled holes in the "H" section post using 38mm external wood screws. Four screws on each side.

On concrete slotted posts, the panels will drop into the slot.

A variety of treated wooden posts is available to suit this style of panel. Alternatively, for a longer-lasting rot-proof solution we have traditional concrete slotted posts or the lightweight metal DuraPost.

When fitting fence panels, it is always a good idea to fit a gravel board to keep the panel well clear of the ground and any leaves or debris that may pile up against the fence. We have in stock a range of wooden, composite, and concrete gravel boards.

Treating with a good quality UV oil will help to keep the panel looking good for longer.