Treated Feather Edge boards for closeboard fencing.
Overlapping vertical feather edge boards covering a framework to make a closeboard fence, with a matching closeboard gate.
Long run of Closeboard fencing with feather edge boards, round top posts and capping along one side of a property.
A closeboard fence made with feather edge boards and erected behind a stepped wall.
Treated Feather Edge boards for closeboard fencing.
Overlapping vertical feather edge boards covering a framework to make a closeboard fence, with a matching closeboard gate.
Long run of Closeboard fencing with feather edge boards, round top posts and capping along one side of a property.
A closeboard fence made with feather edge boards and erected behind a stepped wall.

Crestala Fencing Centre

Feather Edge Boards

Feather edge boards for closeboard fencing are made from a 100mm x 22mm board cut diagonally to make two feather edge boards.
All our feather edge boarding is pressure treated after cutting for a longer life.

Height: 0.75 (29 1/2") Cut to Order.
£0.78
Tax included.

Pickup available at Crestala Fencing Centre

Key Features
  • Treated softwood Feather Edge Boards for closeboard
  • 10cm (4") wide
  • 12.7 needed per metre
Anticipated Lead Time
Stocked item, except 750mm, 900mm, 2.25mm and any other special lengths required are cut to order. Would you please allow at least 24hours notice.
Product Specifications
Materials:Treated softwood
How to Use

Feather Edge is mainly used for the vertical cladding of Arris rails or 38mm x 88mm square sawn rails as part of a closeboard fence.

It can also be used horizontally as a replacement for Weatherboard when cladding sheds and log stores etc.

Fitting

The boards should be overlapped by approximately 20mm.
The boards are attached to the rails using 50mm galvanised nails: one nail per rail, per board.
Measuring & Quantity Calculations

To calculate the number of boards required, multiply the number of meters by 12.7 or feet by 3.8 (38 boards per 3m bay). Always allow for a few spares.
Installation Tips

Do not be tempted to reduce the overlap as the feather edge will shrink during dry spells, and you will find that gaps open up between the featheredge.

Do you need help or need a bit more information about Closeboard Fencing? Check out our Closeboard Materials and Information Helpsheet.
Recommended Aftercare

Please see our Helpsheet on looking after pressure treated fencing

Feather edge boards are prone to warping, particularly before being fixed on the arris rails. Therefore, feather edge boards need to be stored out of direct sunlight before assembly into the fence after delivery. For more information on this topic, please read our Help sheet on the Characteristics of timber
Product Helpsheets
Related Products