125mm x 100mm plain post, usually mortised for closeboard fencing.
125mm x 100mm (5in x 4in) treated fence post
End view of a pack of 12.5cm x 10cm treated softwood posts
End view of a pack of 12.5cm x 10cm treated softwood posts
125mm x 100mm plain post, usually mortised for closeboard fencing.
End view of a pack of 12.5cm x 10cm treated softwood posts

Crestala Fencing Centre

125mm x 100mm Treated Timber Fence Posts

125mm x 100mm pressure-treated to UC 4 for in-ground contact.  Strong posts which are usually used in exposed areas or for higher fences.

Size: Post 2.4m x 100 x 125.
£26.57
Tax included.

Pickup available at Crestala Fencing Centre

Key Features

We stock 125mm x 100mm treated softwood posts in heights from 2.4m up to 3.6m, suitable for fencing, decking frame supports, or gate posts. These posts are pressure-treated to UC4 for in-ground use.

We also offer Mortised (morticed) 125mm x 100mm posts for Closeboard and Palisade (Picket) fencing. Our mortised posts can be machined to match existing posts for fence repairs. 12.5cm x 10cm Mortised posts for closeboard and picket fencing.

All our 5" x 4" posts have square ends (flat) as standard. 
Any 125 x 100mm post can have corner (edge) chamfering, different tops, or router lines added if desired. Please use the Made to Measure Sizes section below to tell us what you need, and we will email you a quote. 

Our 125mm x 100mm sawn softwood posts are treated with the latest-generation preservatives to the UC4 standard.

  • Suitable for use as Fence or Gate posts.
  • 125mm x 100mm posts can be mortised for Closeboard and Palisade fencing.
Made To Measure Sizes
Please use this section to ask us questions or to tell us about any non-standard posts you need.
We can shorten posts or add post tops to order. Please contact our Sales Team for a quote and availability Contact Us
Anticipated Lead Time
Plain posts are stocked items. Special lengths and tops can usually be cut within 24 hrs , If time is an issue please speak to a member of our team before ordering.
Product Specifications
Width (Metric):125 mm
Depth (Metric):100 mm
Materials:Pressure treated softwood. All our 125 x 100mm posts are pressure treated with the latest generation preservatives to UC4 standard for in-ground contact.
How to Use

Here's a bit more general information about our wooden 12.5cm x 10cm Fence and Gate Post

Edge chamfering, different post tops and router lines can be added to softwood posts if desired.

If you can, we do recommend adding an extra treatment to any timber that is in contact with the ground, particularly from 100mm (4") above ground level to 450mm (18") below ground level. 
Installation Tips

We have both fast-setting post mix and the more traditional 20mm Ballast and cement for making a dry mix. Either of these options is suitable for securely fixing 125 x 100mm fence or gate posts in position.

5" x 4" posts are normally used in more exposed areas or for higher fences, and for this reason, we recommend that the holes for these posts be a minimum of 750mm deep to give the fence a good, solid footing.
Recommended Aftercare

Please read our Helpsheet on Looking After Pressure-treated Fencing
Product Helpsheets
Related Products