Withyham Entrance Gates

Withyham Entrance Gates

£481.06£1,028.17 inc. VAT

Available on backorder

  • All Withyham gates are made to order.
  • Flat top Tongue and Groove Gates.
  • Heavy-duty frame with a solid top rail.
  • Priced per PAIR.
  • Frame Ex* 100 x 75mm Stiles & Ex 100 x 50mm Rails.
  • All the timber is pressure treated.
  • For all the pairs of gates priced below, special widths and heights are priced as the next size up.
  • We stock Gate fittings for all sizes of our tongue and groove Withyham gates. Please contact our Sales Team for information on the options available.
  • Other heights, widths and single gates are available please contact us for price and availability

More Information

Crestala’s Withyham Entrance Gates are manufactured on-site in our workshop by our skilled gate makers.

We can make special sizes.

Other tongue and groove entrance gates manufactured by Crestala are the Hartfield, The Fordcombe, the Eridge and the Langton.

Our standard frame tongue and groove domestic gates are the Penshurst, the Leigh, The Holtye, the Ashurst, the Blackham and the Frant.

All tongue and groove Withyham entrance gates manufactured by Crestala are strong yet offer very good value for money. The timber used is pressure-treated, joinery-grade, slow-growing Scandinavian redwood. The treatment provides good protection against rot and also insect attack.

All Withyham gates supplied by Crestala need to be stored, treated and cared for properly before and after hanging. Please, read the recommendations on our “Important Gate Care Information” sheet for more detailed instructions. Failure to follow these instructions may invalidate any future claims.

All treated softwood gates are susceptible to natural movement or shaking (cracks in the timber) as the wood expands and contracts during the normal weathering process. This is not considered to be a defect unless very severe.

We recommend fitting adjustable hinge sets. This enables the gates to be reset to allow for seasonal variations.

For help with measuring up for your new gates, try our Blog entry, Measuring for new side or entrance gates.

*Measurements shown are taken before the wood is planed. As a result, its finished size is roughly 5mm smaller than the original size.

Additional information


0.9m (35 1/2"), 1.2m (47 1/4"), 1.5m (59"), 1.8m (71"), 2.1m (6'10")


0.9m, 1.2m, 1.5m, 1.8m

Pair Width

1.8m, 2.1m, 2.4m, 2.7m, 3m, 3.3m, 3.6m, 3.9m, 4.2m, 4.5m

Go to Top