Penshurst tongue and groove, softwood gates with flat top
A bespoke Penshurst style gate with a small window built in.
Penshurst tongue and groove, softwood gates with flat top
A bespoke Penshurst style gate with a small window built in.

Crestala Fencing Centre

Penshurst Tongue and Groove Gate

The Penshurst tongue-and-groove gates with capping are manufactured in our workshops. 
Penshurst gates, manufactured by Crestala, are robust yet offer very good value for money. The timber used is pressure-treated, joinery-grade, slow-growing Scandinavian redwood. The treatment offers effective protection against rot and insect infestations.
We can make special widths and heights. Please see the Made to Measure Sizes section below.
When ordering, please stipulate whether the gate is Left or right-hand hanging in the  Add Notes section of the Cart. This enables us to fit the bracing on your gate correctly.

Right Hand Hanging -  Looking at the FRONT of the gate, the hinges will be on your RIGHT

Left Hand Hanging - Looking at the FRONT of the gate, the hinges will be on your LEFT

Width: 0.9m (2'11") All heights except 1.8m are made to order
Height: 0.9m (35 1/2")
£113.45
Tax included.

Pickup available at Crestala Fencing Centre

Key Features
  • Flat top gate with capping.
  • Fully framed, ledged and braced.
  • Priced per gate.
  • Standard frame Ex* 100 x 50 Stiles & Ex 100x 38mm rails.
  • Special widths and heights should be priced as the next size up.
  • Widths over 1.2m can be made but are not guaranteed.
Made To Measure Sizes
We make Penshurst gates to meet customer orders. Please contact our Sales Team to order a standard width or bespoke size gates.
The maximum width is 1.2m.
The minimum width is 0.8m.
The Maximum height to the highest point is 2.1m.
 Contact Us
Anticipated Lead Time
1.8m x 0.9m is stocked, other sizes are made to order. Lead times may vary, but they can be from a couple of days to three weeks. If time is essential, please contact our Sales Team before ordering.
Product Specifications
Materials:Pressure-treated softwood
Measuring & Quantity Calculations

If you are unsure about measuring for a gate, please read our Helpsheet, Measuring for New Side or Entrance Gates, which provides guidance on the measuring process, or speak to a member of our Sales Team.
Installation Tips

We can supply all the fittings you need to hang and secure your new Penshurst gate. We also recommend fitting adjustable hinges to alleviate any seasonal gate movement.
Recommended Aftercare

All Penshurst gates made by Crestala must be stored, treated and cared for properly before and after hanging. Please, read the recommendations on our " Crestala Gate Care Information" helpsheet for more detailed instructions.

Treated softwood gates are susceptible to natural movement or shaking (cracks in the timber) as the wood expands and contracts during the normal weathering process.

Product Helpsheets
Related Products