A pair of Estate gates.
A pair of Estate gates.
A pair of Estate gates in a driveway
A pair of Estate gates in a driveway
Estate gate at the end of a house driveway.
Estate gate at the end of a house driveway.
Iroko Estate gates fitted at the entrance to a driveway.
Iroko Estate gates fitted at the entrance to a driveway.
A pair of Estate gates.
A pair of Estate gates in a driveway
Estate gate at the end of a house driveway.
Iroko Estate gates fitted at the entrance to a driveway.

Crestala Fencing Centre

Estate Gates

These gates are left or right-handed. The hand of the gate is determined by looking at the front or good side of the gate, and then which side of the gate the hinges are on is the hand. If you are unsure, please ask our Sales Team for assistance.

Special heights and widths are available to order; contact our Sales Team for a quote.  Please refer to the Made-to-Measure Sizes section below.

Available on backorder only

 

Hand: Left hand hanging
Width: 3ft
£281.70
Tax included.

Pickup available at Crestala Fencing Centre

Key Features


Estate Gates, with their distinctive crooked, high-hanging stile and extended diagonal brace, are better suited to driveways or property entrances than to field access.

  • Superior quality gates, more suited to use on a drive or entranceway
  • Planed treated softwood
  • Height to the top of the tapered top rail 1.03m (3’3 1/2″)
  • Height to the top of the extended curved hanging stile 1.473m (4’10”)
  • Widths from 0.915m (3′) to 3.66m (12′)
  • These gates can be made to special widths and heights
  • 0.915m (3′) & 1.21m (4′) gates do not have the diagonal cross brace and feature a reduced hanging stile height. Please see the offset pair photo above, as this shows a 0.915m (3′) gate.
  • These gates are Left and Right-Hand hanging.
Made To Measure Sizes
Non-standard widths and different heights can be made to order.
The maximum width for an Estate gate is 12' (3.6m)
The minimum width for a gate is 3' (0.9m).
The lead time for made-to-measure Estate gates is usually six to eight weeks from order.

 Contact Us
Anticipated Lead Time
Available on back-order. Usual lead time is two to three weeks.
Product Specifications
Materials:The timber used is specially selected pressure treated slow grown Scandinavian softwood. Estate gates have a tapered top bar with a quality planed finish. All the rails, vertical braces, and stiles have detailed edge chamfering. Morticed and tenoned joints are fixed with traditional hardwood dowels. Please read our help sheet, Crestala Gate Care Information.
How to Use

We can supply the gate posts and any required accessories, as well as field gate hanging and shutting fittings to complement your gate.
Measuring & Quantity Calculations

For help with measuring up for your new Estate gates, please read our Field Gate hanging measurements infographic.
Recommended Aftercare

Softwood Estate gates are pressure-treated and, in theory, do not require further treatment. However, we strongly recommend that you follow the instructions for oiling gates made with pressure-treated timber in our Crestala gate care information. Please, read the recommendations on our “Crestala Gate Care Information” sheet for more detailed instructions.

The manufacturer, Charltons Gates, has their own wooden gate care instructions at https://charltonsgates.com/care-instructions-for-new-gates

All wooden gates are susceptible to natural movement or shaking (cracks in the timber) as the timber expands and contracts during the normal weathering process. This is not considered to be a defect unless it is very severe. We do not recommend using dark stains as they attract heat which may cause additional movement in the timber
Product Helpsheets
Related Products