Edenbridge Palisade Drive and Entrance Gates

Edenbridge Palisade Drive and Entrance Gates

£357.55£715.12 inc. VAT

Available on backorder

  • All Edenbridge gates are made to order.
  • Flat, Pointed or Round tops.
  • Heavy-duty frame.
  • Priced per PAIR.
  • All timber is pressure treated.
  • For help with measuring up, see our Blog entry Measuring for new side or entrance gates.
  • Gate fittings for all sizes of Edenbridge gates are available.
  • Other heights, widths and single gates are available please contact us for price and availability

More Information

Crestala’s Edenbridge palisade drive and entrance gates are manufactured on-site in our workshop by our skilled Gatemakers. We can make special sizes and some style variations. These strong gates will provide extra security across your driveway whilst not completely shutting off the outside world.

Materials and Treatment

All heavy-frame Edenbridge gates manufactured by Crestala are made to be robust yet offer excellent value for money. The timber used is pressure-treated, joinery-grade, slow-growing Scandinavian redwood.  Ex* 100 x 75mm Stiles & Ex 100 x 50mm Rails. The treatment provides good protection against rot and also insect attacks.

All Edenbridge gates supplied by Crestala need to be stored, treated and cared for properly before and after hanging. Please, read the recommendations on our “Important Gate Care Information” sheet for more detailed instructions. Failure to follow these instructions may invalidate any future claims.

We also make standard frame Palisade gates and Close space round top Palisade gates suitable for domestic use.

Gate Furniture and Fittings

A selection of Gate furniture and hanging fittings suitable for all widths and heights of our Edenbridge gates is in stock and can be ordered with your gates.

Measuring for your new gates

For help with measuring up for your new Edenbridge Gates, we have published in our Blog a sheet on Measuring for new side or entrance gates which you may find helpful.

Information about Treated gates

All treated softwood gates are susceptible to natural movement or shaking (cracks in the timber) as the wood expands & contracts during the normal weathering process. This is not considered to be a defect unless very severe.

*Measurements before the wood is planed. It’s roughly 5mm smaller than the original size.

Other heights, widths and single gates can be made; please contact us for price and availability.

Additional information


0.9m (35 1/2"), 1.20m (47 1/4"), 1.5m (59"), 1.8m (71"), 2.1m (6'10")


0.9m, 1.2m, 1.5m, 1.8m

Pair Width

1.8m, 2.1m, 2.4m, 2.7m, 3m, 3.3m, 3.6m, 3.9m, 4.2m, 4.5m

Go to Top