More Information

Crestala’s Rotherfield closeboard gates are manufactured on-site in our workshop by our skilled Gatemakers. We can make special sizes.

We recommend using a heavy frame gate for gate widths over 1.2m wide, like our Groombridge gates. Please contact our Sales Team for more information.

We also have all the fittings you need to be able to hang and secure your new gate.

If you are unsure about measuring for a gate, please read our blog, Measuring for new side or entrance gates, which should help or speak to a sales team member.

All Rotherfield closeboard gates manufactured by Crestala are made to be robust yet offer excellent value for money. The timber used is pressure-treated, joinery-grade, slow-growing Scandinavian redwood. The treatment provides good protection against rot and insect attack.

All treated softwood gates are susceptible to natural movement or shaking (cracks in the timber) as the wood expands and contracts during the regular, natural weathering process. This is not considered to be a defect unless very severe.

All Rotherfield Closeboard gates manufactured by Crestala must be stored, treated and cared for properly before and after hanging. Please, read the recommendations on our “Important Gate Care Information” sheet for more detailed instructions. Failure to follow these instructions may invalidate any future claims.

*Measurements before the wood is planed. It’s roughly 5mm smaller than the original size.