Front view of a pair of Hartfield swish top gates.

Front view of a high pair of Hartfield tonque and groove swish top gates.

Rear view of a pair of Hartfield swish top gate showing the frame and braces.

Front view of a pair of Crestala's Hartfield swish top, tongue and groove entrance gates.

Back of Crestala's Hartfield swish top Entrance Gates showing the galvanised fittings.

Crestala Fencing Centre

Hartfield Swish Top Entrance Gates

Hartfield Swish Top Entrance Gates are crafted on-site at Crestala's workshop by our expert gate makers, allowing us to produce gates that fit perfectly and look attractive at the end of your driveway. These tongue-and-groove boarded gates are sturdy and provide excellent value for your money.

*We can create special widths and heights*. Please refer to the Made-to-Measure Sizes section below.
Not suitable for automation, please see our hardwood range.

All Hartfield gates are made to order. PRICED PER PAIR OF GATES

All Hartfield Gates are custom-made and bespoke; therefore, we cannot offer refunds or exchanges.

Height: 0.9m (35 1/2") Made To Order 0.9m (35 1/2") Made To Order 1.2m (47 1/4") Made To Order 1.5m (59") Made to Order 1.8m (71") Made To Order 2.1m (6'10") Made To Order

Pair Width: 1.8m 1.8m 2.4m 3m 3.6m

Product variants

£732.00

Tax included.

Pickup available at Crestala Fencing Centre

Key Features

All Hartfield Entrance Gates are made to order.
Swish top Tongue & Groove gate with solid top rail.
Heavy-duty frame.
Priced per PAIR.
Frame Ex* 100 x 75mm Stiles & Ex 100 x 50mm Rails.
All the timber used in the manufacture of Hartfield gates is pressure treated.
Other heights and widths are available.

Made To Measure Sizes

We can make Hartfield gates in bespoke sizes. Please contact our Sales Team for a quote or to order a standard pair.
The maximum width for a pair is 3.6m.
The minimum width for a pair is 1.8m.
The Maximum height to the highest point is 2.1m.
Contact Us

Anticipated Lead Time

Made to order. Lead times may vary, but they are usually one to three weeks. If time is essential, please contact our Sales Team before ordering.

Product Specifications

Materials:

All Hartfield entrance gates manufactured by Crestala are robust yet offer excellent value for money. The timber used is pressure-treated, joinery-grade, slow-growing Scandinavian redwood. The treatment provides good protection against rot and insect attacks. *Measurements before the wood is planed. It’s roughly 5mm smaller than the original size.

How to Use

Hartfield swish-top gates are heavy and need to be supported by good solid posts or brick piers. If you have existing posts, please check them for security before fitting your new gates.

Gate fittings for all the different sizes of Hartfield gates are available. We recommend using an adjustable hinge set to support our heavy-frame gates. If you are unsure which type or size of hinge you need for your gates, please ask one of our team members, who will advise you.

Measuring & Quantity Calculations

Hartfield gates are priced as pairs.

For measuring information, please read our help sheet.
Measuring for new side or entrance gates.

Installation Tips

For help with measuring up for your new gates, see our Help sheet Measuring for new side or entrance gates.

We stock a range of Gate fittings for all sizes of our tongue and groove Hartfield gates. Please contact our Sales Team for information on the various options available.

Recommended Aftercare

Hartfield Swish Top Gates gates made by Crestala must be stored, treated and cared for properly before and after hanging.

Please read our Crestala Gate Care Information help sheet for guidance on looking after your new gates.

All treated softwood gates are susceptible to natural movement or shaking (cracks in the timber) as the wood expands and contracts during the normal weathering process. This is not considered to be a defect unless it is very severe. Fitting adjustable hinges can help alleviate some of the natural seasonal gate movement.

Product Helpsheets